Bed to fit the XR 300 Rectangular 7x10ft Trampoline

£149.99

Write a Review

Product Description

Bed to fit the XR 300 Rectangular 7x10ft Trampoline

PLEASE NOTE: Springs are not Included

Bed to fit Super Tramp XR300 (21 springs on long side x 13 springs on short side) that uses 68 x 7" springs

Check before you order: this bed is for current XR 300 trampolines, which have 68 springs and no corner springs. Older XR 300 trampolines had corner springs and 72 springs. Please count the springs on your trampoline first, and contact our team if yours has 72 or you are unsure.

Centrally-positioned logo for safer bouncing
8 rows of heavy-duty stitching for superior strength
Highly durable, rust-proof steel spring anchors
UV-resistant, premium grade polypropylene mesh material

Download our useful user guide on how to replace your rectangular trampoline bed.

This high-quality black polymesh bed has been designed to fit the XR300 rectangular trampoline. This trampoline uses a total of 68 (21 x 13) of our 7" springs.

You can find replacement 7” springs HERE

Please note: springs are not included. Please make sure you know the dimensions of your trampoline before ordering. Your trampoline frame measurements should be taken from outer-frame edge to outer-frame edge, and spring measurements taken including the hooks. The spring should be temporarily removed from the trampoline for an accurate measurement where the spring is not under tension.

**More Information**
Bed Printing	No
Bed Material	Polymesh
Bed Length	257cm / 8ft 5
Bed Width	162cm / 5ft 4
Spring Attachments	Metal Triangles
Number of spring attachments	68 (72 With Corner Springs)
Number of springs (Long side)	21
Number of springs (Short side)	13

Frequently Asked Questions

Do I need new springs when replacing a trampoline bed?

Not always. If your existing springs are still in good condition and have not lost their tension, they can usually be reused. However, worn or stretched springs may affect the performance of the new bed.

Can I use my trampoline immediately after installing a new bed?

Yes, once the bed is securely installed and all springs are evenly attached, the trampoline is ready to use. It's recommended to double-check the tension and attachments before first use.

How can I make my trampoline bed last longer?

Regular maintenance such as keeping it clean, using a weather cover, and avoiding excessive weight or misuse can help extend the lifespan of your trampoline bed.

Will this bed fit my trampoline?

This bed is made for the trampoline named in the title. If you are unsure which model you have, measure the frame from outer edge to outer edge, remove one spring and measure it from hook to hook (rounding down to the nearest standard size: 5.5, 7, 8.35, 8.5, 8.57 and 9.25 inch), and count the spring attachments (the small triangles) around the bed, then contact our team and we will confirm it before you order.

How do I fit a replacement bed?

Adult installation is required, using a spring tool and protective gloves. Remove the old springs in opposite pairs, working across the trampoline so the tension is released evenly, and take the corner springs off last. Unfold the new bed inside the frame with the painted markings facing up, then refit the springs in opposite pairs: the elongated hook goes into the frame and the standard hook onto the steel bed triangle. Refit the frame pad to finish. See our installation guides for the full steps.